Surface Sanitiser

Cleaning surfaces from microbial contamination is easy with SAN-AIR Surface Sanitiser. 


  1. Immediate visible microbial removal

  2. Long-lasting

  3. Scientifically tested

  4. Environmentally friendly and exceptionally safe to use

  5. Ready to use, easy to apply

SAN-AIR has been independently tested and confirmed to remove 99.99% of germs.

SAN-AIR protects the cleaned surface for up to 12 months, depending upon usage. Keeping you and your family safe from further contamination.


Clean Safely

SAN-AIRtm Sanitiser thoroughly cleans any surface of microbial contamination without the use of toxic chemicals.  Simply spray onto any surface leave 15 minutes then wipe away.


  • Easy to use
  • 100% safe for people, pets, property
  • No toxic chemicals
  • Biodegradable
  • Sustainable
  • Fast-acting
  • Kill germs (bacteria, mould)
  • Attacks the root of mould
  • Remove odours
  • Reduce your cleaning frequency
  • Reduce your environmental impact

100% natural active ingredients

This product uses 100% natural Australian essential oils. Unlike other cleaning products, it is not corrosive, thus will not cause damage to property when applied. 


      1. SET UP
        • Adjust the nozzle to a fine spray, test the surface you want to clean by spraying a small area first. 
          (Note it is normal to see the surface lighter in colour while wet).
      2. CLEAN
        • Spray to coat area evenly, wait 15 minutes and wipe the area with a clean dry cloth.
        • Ensure that dirty clothes are not reused as you will spread the contamination. Instead, for each wipe, use a clean area of the cloth until the cloth is used up, then continue cleaning with a new clean cloth.
        • Repeat step 2 until all contamination has been removed.
      3. FINISH
        • Use a final spray with a fine mist and allow to air dry, leaving a fine prevention coating.

 Follow the instruction on the label to get maximum results.


Don't risk damaging you or your property with chemical sanitisers.